Editing FreedomTower/ConstructionDocs (section)

==== Flash OLSR capable firmware ====
First, it's necessary to flash the devices with the proper firmware. We'll go over that procedure once, but you'll need to do it for all six radios. For the time being, we are using a version of Ubiquiti's AirOS that's been patched to support OLSR routing. You'll also need to have TFTP installed on your machine. It is widely available via your fravorite package manager. Grab the firmware ([https://wiki.graz.funkfeuer.at/UbntStations UbntStation info], [http://wiki.ninux.org/UbiquitiNanostationM5 UbiquitiNanostationM5 info]):

* For LocoM5, using binary image from [http://build.ffgraz.net/ubnt/AirOS%20v5.x/XM.v5.3.3.sdk.9634.with-olsr-0.6.1/ here]
* For Nanostation2, use the bin file from [https://wiki.graz.funkfeuer.at/UbntStations?action=AttachFile&do=view&target=XS2.ar2316.v3.5.SDK.100607.2152.bin here]

<blockquote>
--[[User:Sunflame|Sunflame]] 07:58, 13 December 2011 (CST) I had an issue with the configuration resetting   to default every power cycle. It was due to a bug discussed [http://www.ubnt.com/forum/showthread.php?t=16923 here]. The solution was to flash the latest official firmware via tftp and then the custom firmware via web interface. This resolved the problem.
</blockquote>